Journal Papers

2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024

2024년

Seongrae Kim, Yeo Un Yoon, Byung Chul Kim, “Method for estimating management points for dimensional quality management in shipbuilding and offshore plant construction using terrestrial laser scanning and a computer-aided design model,” Advanced Engineering Informatics, Vol. 62, Part A, Article: 102591, October 2024,  https://doi.org/10.1007/s42791-023-00059-5. (SCI)

2023년

Byung Chul Kim, “Reconstruction of design history of 3D CAD models using deep learning: research trends,” JMST Advanced, Vol. 5, No. 4, pp. 113–110, 9 December 2023, https://doi.org/10.1007/s42791-023-00059-5.

Min Hyeok Cha, Byung Chul Kim, “Machining feature recognition using BRepNet,” Journal of Mechanical Science and Technology, Vol. 37, No. 12, pp. 6103–6113, December 2023, https://doi.org/10.1007/s12206-023-2403-4. (SCIE)

김회창, 차민혁, 김병철, “심층 강화학습을 이용한 단순 가공 형상의 설계이력 재구성(Design-history reconstruction in simple machined shapes using deep reinforcement learning)”, 한국기계가공학회지, Vol. 22, No. 7, pp. 62-69, 2023년 7월, https://doi.org/10.14775/ksmpe.2023.22.07.062. (KCI)

Gwangsik Kim, Byung Chul Kim, “Classification of functional types of lines in P&IDs using a graph neural network,” IEEE Access, Vol. 11, pp. 73680–73687, July 2023, https://doi.org/10.1109/ACCESS.2023.3296223. (SCIE)

2022년

Dong Kyou Park, Byung Seok Kong, Byung Chul Kim*, “Development of crash pad using overmolding technology”, International Journal of Automotive Technology, Vol. 23, No. 6, pp. 1739–1745, December 2022, https://doi.org/10.1007/s12239-022-0151-6. (SCIE)

Byung Chul Kim, Hyungki Kim, Yoochan Moon, Gwang Lee, Duhwan Mun, “End-to-end digitization of image format piping and instrumentation diagrams at an industrially applicable level”, Journal of Computational Design and Engineering, Vol. 9, No. 4, pp. 1298–1326, August 2022, https://doi.org/10.1093/jcde/qwac056. (SCIE)

Byung Chul Kim, Hoe Chang Kim, Sungho Han, Dong Kyou Park, “Inspection of underwater hull surface condition using the soft voting ensemble of the transfer-learned models”, Sensors, Vol. 22, No. 12, Article: 4392, June 2022,https://doi.org/10.3390/s22124392. (SCIE)

2021년

Changmo Yeo, Byung Chul Kim, Sanguk Cheon, Jinwon Lee, Duhwan Mun, “Machining feature recognition based on deep neural networks to support tight integration with 3D CAD systems”, Scientific Reports, 11, Article number: 22147, November 2021. (SCIE)

김회창, 김병철, 박영준, “합성곱 신경망을 이용한 수중 선체면 영상의 청소 상태 검사(Cleaning condition inspection of underwater hull surface images using a convolution neural network)”, 대한기계학회논문집A, Vol. 45, No. 9, pp 817-823, 2021년 9월. (SCOPUS)

Jonghun Lee, Byung Chul Kim, Won-Sun Ruy, Ik Seung Han, “Parametric optimization of FPSO hull dimensions for Brazil field using sophisticated stability and hydrodynamic calculations”, International Journal of Naval Architecture and Ocean Engineering, Vol. 13, pp. 478-492, June 2021. (SCIE)

Hyunoh Lee, Chiho Noh, Seyun Kim, Byung Chul Kim, Jinpyo Park, Duhwan Mun, Soonhung Han, “Neutral model-based interfacing of 3D design to support collaborative project management in the process plant industry”, Journal of Computational Design and Engineering, Vol. 8, No. 3, pp. 824-835, May 2021. (SCIE)

Byung Chul Kim, Ilhwan Song, Duhwan Mun, “Practical method for the fast generation of a CAM model for jet engine parts”, Advances in Mechanical Engineering, Vol. 13, No. 3, pp. 1-12, March 2021. (SCIE)

Byung Chul Kim, Hyunoh Lee, Duhwan Mun, Soonhung Han, “Lifecycle management of component catalogs based on a neutral model to support seamless integration with plant 3D design”, Journal of Computational Design and Engineering, Vol. 8, No. 1, pp. 409-427, February 2021. (SCIE)

2020년

김세윤, 이현오, 김병철, 문두환, “배관 및 기기 공종의 중립 형식의 플랜트 3D CAD 모델 가시화 시스템 개발(Development of a visualization system for neutral plant 3D CAD models in piping and equipment disciplines)”, 한국CDE학회 논문집, Vol. 25, No. 3, pp. 307-319, 2020년 9월.

권기연, 김병철, “선박 곡부재 계측 포인트에 대한 곡면 모델링 방법(A surface generation method for the measured points of a curved plate in shipbuilding)”, 한국CDE학회 논문집, Vol. 25, No. 3, pp. 236-245, 2020년 9월.

김성래, 권대용, 김병철, “외부 메모리 기반 대용량 점군 데이터의 가시화 및 편집(Visualization and editing of large point cloud data based on external memory)”, 한국CDE학회 논문집, Vol. 25, No. 3, pp. 267-276, 2020년 9월.

Byung Chul Kim, Junho Lee, Ki-Youn Kwon, “Method for automatically generating a two-dimensional triangular mesh of a bone from a CT image considering its density heterogeneity”, Journal of Mechanical Science and Technology, Vol. 34, No. 7, pp. 2941-2952, July 2020. (SCIE)

문두환, 김병철, “플랜트 기자재 라이브러리 구축을 위한 3차원 파라메트릭 형상모델러(Three-dimensional parametric geometric modeler for building a plant equipment and materials library)”, 한국CDE학회 논문집, Vol. 25, No. 2, pp. 173-181, 2020년 6월.

김병철, “형상 분산과 합성곱 신경망을 이용한 플랜트 배관 부품에 대한 3차원 점군의 분류(Classification of the three-dimensional point clouds of plant piping parts using a shape distribution and convolutional neural network)”, 대한기계학회논문집A, Vol. 44, No. 4, pp. 313-320, 2020년 4월. (SCOPUS)

Byung Chul Kim, Bongchul Kim, Sangjin Park, Hans Teijgeler, Duhwan Mun, “ISO 15926–based integration of process plant lifecycle information including maintenance activity”, Concurrent Engineering-Research and Applications , Vol. 28, No. 1, pp. 58-71, March 2020. (SCI)

2019년

Hyungki Kim, Moohyun Cha, Byung Chul Kim, Inhyeok Lee, Duhwan Mun “Maintenance framework for repairing partially damaged parts using 3D printing”, International Journal of Precision Engineering and Manufacturing, Vol. 20, No. 8, pp. 1451-1464, August 2019. (SCIE)

Soonjo Kwon, Duhwan Mun, Byung Chul Kim, Soonhung Han, Hyo-Won Suh, “B-rep model simplification using selective and iterative volume decomposition to obtain finer multi-resolution models”, Computer-Aided Design, Vol. 112, pp. 23-34, July 2019. (SCI)

Hyungki Kim, Moohyun Cha, Byung Chul Kim, Taeyun Kim, Duhwan Mun, “Part library-based information retrieval and inspection framework to support part maintenance using 3D printing technology”, Rapid Prototyping Journal, Vol. 25, No. 3, pp. 630-644, April 2019. (SCIE)

김봉철, 이인혁, 김병철, 문두환, “ISO 15926 기반 공정 플랜트 생애주기 데이터 가시화 플랫폼의 개발(Development of a platform to visualize lifecycle data based on ISO 15926 for process plants)”, 한국CDE학회 논문집, Vol. 24, No. 1, pp. 49-61, 2019년 3월.

2018년

김병철, “뼈의 불균질성 가시화를 위한 CT 영상의 메쉬 모델 변환 방법(Conversion method of a CT image to the mesh model for visualization of the heterogeneity of a bone)”, 한국CDE학회 논문집, Vol. 23, No. 4, pp. 353-360, 2018년 12월.

Soonjo Kwon, Byung Chul Kim, Duhwan Mun, and Soonhung Han, “User-assisted integrated method for controlling level of detail of large-scale B-rep assembly models”, International Journal of Computer Integrated Manufacturing, Vol. 31, No. 9, pp. 881-892, September 2018. (SCIE)

Byung Chul Kim, Jaesun Lee, Hyungki Kim, Sanguk Cheon, Hongbae Jun, and Duhwan Mun, “Similarity comparison of original and remodeled plant 3D piping CAD models using quantitative evaluation metrics for offshore plants”, Journal of Marine Science and Technology, Vol. 23, No. 3, pp. 647-661, September 2018. (SCIE)

김병철, “합성곱 신경망을 이용한 3차원 스캐닝 점군 데이터의 플랜트 기자재 형상 인식(Shape recognition of plant equipment from 3-D scanned point cloud data using a convolutional neural network)”, 대한기계학회논문집A, Vol. 42, No. 9, pp. 863-869, 2018년 9월. (SCOPUS)

이현오, 배연주, 권순조, 김병철, 문두환, 한순흥, “플랜트의 3차원 설계를 지원하는 중립 모델 기반 카탈로그 생성 시스템 개발(Development of a neutral model-based catalog generation system to support 3D design of a plant)”, 대한기계학회논문집A, Vol. 42, No. 8, pp. 753-763, 2018년 8월. (SCOPUS)

여창모, 김형기, 박찬석, 김병철, 문두환, 한순흥, “형상 유사도 기반 피팅 검색을 위한 AutoCAD Plant 3D 플러그인 타입 시스템 개발(Development of an AutoCAD plant 3D-based plug-in type system for the shape similarity-based fitting retrieval)”, 한국CDE학회 논문집, Vol. 23, No. 2, pp. 155-164, 2018년 6월.

문두환, 김병철, “CAD 모델의 특징형상기반 단순화를 지원하는 확장형 시스템 개발(Development of an extensible system supporting feature-based simplification of a CAD model)”, 한국CDE학회 논문집, Vol. 23, No. 1, pp. 41-51, 2018년 3월.

2017년

Duhwan Mun and Byung Chul Kim, “Extended progressive simplification of feature-based CAD models”, International Journal of Advanced Manufacturing Technology, Vol. 93, No. 1-4, pp. 915-932, October 2017. (SCIE)

배연주, 이재선, 김병철, 김성한, 문두환, “기자재 라이브러리 구축을 위한 3D 형상, 사양 및 포트 정합 시스템의 개발(Development of a system to integrate 3D shape, specifications, and ports for the construction of equipment and materials library)”, 한국CDE학회 논문집, Vol. 22, No. 3, pp. 273-283, 2017년 9월.

Duhwan Mun and Byung Chul Kim, “Three-dimensional solid reconstruction of a human bone from CT images using interpolation with triangular Bézier patches”, Journal of Mechanical Science and Technology, Vol. 31, No. 8, pp. 3875-3886, August 2017. (SCIE)

Byung Chul Kim, Youngjun Jeon, Sangjin Park, Hans Teijgeler, David Leal, and Duhwan Mun, “Toward standardized exchange of plant 3D CAD models using ISO 15926”, Computer-Aided Design, Vol. 83, pp. 80-95, February 2017. (SCI)

Soonjo Kwon, Duhwan Mun, Byung Chul Kim, and Soonhung Han, “Feature shape complexity: A new criterion for the simplification of feature-based 3D CAD models”, International Journal of Advanced Manufacturing Technology, Vol. 88, No. 5, pp. 1831-1843, February 2017. (SCIE)

박상진, 김봉철, 김병철, 문두환, 한순흥, “ISO 15926 기반 공정 플랜트 설계, 제작, 및 시공 데이터 변환기의 개발(Development of a translator of ISO 15926-based design, manufacture, and construction data for process plants)”, 한국CDE학회 논문집, Vol. 22, No. 4, pp. 414-424, 2017년 12월.

2016년

Yeoun Yoon and Byung Chul Kim, “CAD model simplification using feature simplification”, Journal of Advanced Mechanical Design, Systems, and Manufacturing, Vol. 10, No. 8, pp. 1-12, October 2016. (SCIE).

Soonjo Kwon, Byung Chul Kim, Hojin Hwang, Duhwan Mun, and Soonhung Han “Enhancement of equipment-information sharing using 3D CAD simplification and digital catalog techniques in the plant industry”, Concurrent Engineering: Research and Applications, Vol. 24, No. 3, pp. 275-289, September 2016. (SCI).

이재선, 김병철, 김형기, 천상욱, 조민철, 이광, 김진현, 문두환, 한순흥, “Aveva Marine과 SmartMarine 3D 간의 해양 플랜트 3D 배관 CAD 모델 유사도 평가 시스템 개발(Development of a similarity evaluation system for offshore plants’ 3D piping CAD models created using Aveva Marine and SmartMarine 3D)”, 대한기계학회논문집A, Vol. 40, No. 4, pp. 397-406, 2016년 4월. (SCOPUS)

박준홍, 김병철, “CT 영상에서 뼈의 불균질 모델 생성을 위한 B-스플라인 볼륨의 빠른 보간 방법(Method of fast interpolation of b-spline volumes for reconstructing the heterogeneous model of bones from CT images)”, 대한기계학회논문집A권, Vol. 40, No. 4, pp. 373-379, 2016년 4월. (SCOPUS)

이재선, 김병철, 천상욱, 조민철, 이광, 문두환, “Aveva Marine과 SmartMarine 3D간의 해양 플랜트 3D 배관 CAD 모델의 배치모드 기반 비교 시스템 개발(Development of a batch-mode-based comparison system for 3D piping CAD models of offshore plants)”, 한국CAD/CAM학회논문집, Vol. 21, No. 1, pp. 78-89, 2016년 3월.

김병철, 송일환, 신수철, “형상 검색을 이용한 제트엔진 절삭가공을 위한 빠른 CAD 모델 생성 방법(A fast generation method of CAD model for machining of jet engines using shape search)”, 대한기계학회논문집A권, Vol. 40, No. 3, pp. 335-344, 2016년 3월. (SCOPUS)

2015년

Byung Chul Kim, Duhwan Mun, “Enhanced volume decomposition minimizing overlapping volumes for the recognition of design features”, Journal of Mechanical Science and Technology, Vol. 29, No. 12, pp. 5289-5298, December 2015. (SCIE)

Ikjune Kim, Jaechul Lee, Byung Chul Kim, Jinsang Hwang, Chae Ho Lim, Duhwan Mun, “Verification of product design using regulation knowledgebase and web service”, Journal of Mechanical Science and Technology, Vol. 29, No. 12, pp. 5113-5119, December 2015. (SCIE)

김병철, 박상진, 김봉철, 명세현, 문두환, “ISO 15926 기반 공정 플랜트 3D 설계 정보 통합 플랫폼의 개발(Development of an ISO 15926-based integration platform of 3D design data for process plants)”, 한국CAD/CAM학회논문집, Vol. 20, No. 4, pp. 385-400, 2015년 12월.

Soonjo Kwon, Byung Chul Kim, Duhwan Mun, Soonhung Han, “Graph-based simplification of feature-based three-dimensional computer-aided design models for preserving connectivity”, Journal of Computing and Information Science in Engineering, Vol. 15, No. 3, pp. 031010-031010-14, September 2015. (SCIE)

Sang-Uk Cheon, Byung Chul Kim, Duhwan Mun, “Counter-deformed design of ship structural parts using geometric shape deformation based on welding distortion estimation”, Journal of Marine Science and Technology, Vol. 20, No. 3, pp. 442-453, September 2015. (SCIE).

이재선, 김병철, 이한민, 박성환, 명병수, 문두환, “부품 형상 정보 모델 기반의 자전거 편집설계 방법(A method for bicycle configuration design based on part shape information model)”, 한국기계가공학회지, Vol. 14, No. 3, pp. 74-84, 2015년 6월.

전영준, 김병철, 문두환, “ISO 15926 기반 플랜트 3D 설계 데이터 가시화를 위한 시스템 개발(Development of a system for visualization of the plant 3D design data based on ISO 15926)”, 한국CAD/CAM학회논문집, Vol. 20, No. 2, pp. 145-158, 2015년 6월.

김병철, 송일환, “제트엔진 압축기 케이스의 구멍 가공을 위한 특징형상 인식 기반의 CAM 모델 자동생성(Automatic generation of CAM model for machining holes for jet engine compressor case based on feature recognition)”, 대한기계학회논문집A권, Vol. 39, No. 3, pp. 337-345, 2015년 3월. (SCOPUS)

Soonjo Kwon, Byung Chul Kim, Duhwan Mun, Soonhung Han, “Simplification of feature-based 3D CAD assembly data of ship and offshore equipment using quantitative evaluation metrics”, Computer-Aided Design, Vol. 59, No. 2, pp. 140-154, February 2015. (SCI)

2014년

Byung Chul Kim, Duhwan Mun, “Stepwise volume decomposition for the modification of B-rep models”, International Journal of Advanced Manufacturing Technology, Vol. 75, No. 9-12, pp. 1393-1403, December 2014. (SCIE)

김병철, 권순조, 박선아, 문두환, 한순흥, “특징형상 기반 기자재 3D CAD 조립체 데이터 간략화 시스템 개발 (Development of feature-based 3D CAD assembly data simplification system for equipment and materials)”, 대한기계학회논문집A권, Vol. 38, No. 10, pp. 1075-1084, 2014년 10월. (SCOPUS)

Yeonuk Kang, Byung Chul Kim, Duhwan Mun, and Soonhung Han, “Method to simplify ship outfitting and offshore plant equipment three-dimensional (3-D) computer-aided design (CAD) data for construction of equipment catalog”, Journal of Marine Science and Technology, Vol. 19, No. 2, pp. 185-196, June 2014. (SCIE)

Byung Chul Kim and Duhwan Mun, “Feature-based simplification of boundary representation models using sequential iterative volume decomposition”, Computers & Graphics, Vol. 38, pp. 97-107, February 2014. (SCIE)

2013년

명병수, 이재선, 김병철, 문두환, 이한민, 박성환, “자전거 편집설계를 위한 부품형상 정보 모델 기반 CAD 라이브러리 제어 방법 (Method of controlling CAD library based on part-shape information model for bicycle configuration designs)”, 한국생산제조시스템학회논문집, Vol. 22, No. 6, pp. 1025~1031, 2013년 12월.

김병철, 권순조, 박선아, 문두환, 한순흥, “조선해양 기자재 3D CAD 단품 데이터 간략화 시스템 개발 (Development of 3D CAD part data simplification system for ship and offshore plant equipment)”, 한국CAD/CAM학회논문집, Vol. 18, No. 3, pp. 1-10, 2013년 6월(가헌학술상).

김병철, 천상욱, 문두환, “ISO 10303 STEP을 지원하는 절차적 2D CAD 데이터 번역기 개발 (Development of procedural 2D CAD data translator supporting ISO 10303 STEP)”, 대한기계학회논문집A권, Vol. 37, No. 5, pp. 695-707, 2013년 5월. (SCOPUS)

김병철, 김익준, 한순흥, 문두환, “설계 특징형상 인식을 고려한 단계적 볼륨 분해 (Stepwise volume decomposition considering design feature recognition)”, 한국CAD/CAM학회논문집, Vol. 18, No. 1, pp. 71-82, 2013년 2월.

2012년

Sang-Uk Cheon, Duhwan Mun, Soonhung Han and Byung Chul Kim, “Name matching method using topology merging and splitting history for exchange of feature-based CAD models”, Journal of Mechanical Science and Technology, Vol. 26, No. 10, pp. 3201-3212, October, 2012. (SCIE)

Sang-Uk Cheon, Byung Chul Kim, Duhwan Mun and Soonhung Han, “A procedural method to exchange editable 3D data from a free-hand 2D sketch modeling system into 3D mechanical CAD systems”, Computer-Aided Design, Vol. 44, No. 2, pp. 154-161, February, 2012. (SCI)

Jinggao Li, Byung Chul Kim and Soonhung Han, “Parametric exchange of round shapes between a mechanical CAD system and a ship CAD system”, Computer-Aided Design, Vol. 44, No. 2, pp. 123-131, February, 2012. (SCI)

2011년

Byung Chul Kim, Duhwan Mun, Soonhung Han and Michael J. Pratt, “A method to exchange procedurally represented 2D CAD model data using ISO 10303 STEP”, Computer-Aided Design, Vol. 43, No. 12, pp. 1717-1728, December 2011. (SCI)

Byung Chul Kim, Hans Teijgeler, Duhwan Mun and Soonhung Han, “Integration of distributed plant lifecycle data using ISO 15926 and Web services”, Annals of Nuclear Energy, Vol. 38, No. 11, pp. 2309-2318, November 2011. (SCI)

황태현, 오재용, 황호진, 김병철, 문두환, “공개형 3D 그래픽 엔진을 활용한 선박 운항 시뮬레이터용 실시간 3D 가시화 시스템 개발 (Development of a 3D real-time visualization system for ship handling simulators using an open source 3D graphics engine)”, 한국항해항만학회지, Vol. 35, No. 3, pp. 187-195, 2011년 4월.

Byung Chul Kim, Duhwan Mun and Soonhung Han, “Web Service with parallel processing capabilities for the retrieval of CAD assembly data”, Concurrent Engineering: Research and Applications, Vol. 19, No. 1, pp. 5-18, March 2011. (SCI)

2010년

Byung Chul Kim, Duhwan Mun and Soonhung Han, “Retrieval of CAD model data based on Web Services for collaborative product development in a distributed environment”, International Journal of Advanced Manufacturing Technology, Vol. 50, No. 9-12, pp. 1085-1099, October 2010. (SCIE)

문두환, 김병철, “웹 서비스 기술을 활용한 국제 표준 기반의 플랜트 데이터 저장소의 구현 (Construction of an international standard-based plant data repository utilizing Web Services technology)”, 산업공학(IE Interfaces), Vol. 23, No. 3, pp. 213-220, 2010년 9월

2009년

문두환, 김병철, 한순흥, “온톨로지와 ISO 15926을 이용한 공정 플랜트 기자재의 표현 (Representation of process plant equipment using ontology and ISO 15926)”, 한국CAD/CAM학회논문집, Vol. 14, No. 1, pp. 1-9, 2009년 2월.

2008년

    천상욱, 문두환, 김병철, 한순흥, “프리핸드 스케치 기반 모델링 시스템과 상업용 MCAD의 절차적 인터페이스 (Procedural interface between freehand sketch-based modeling system and commercial MCAD)”, 한국CAD/CAM학회논문집, Vol. 13, No. 4, pp. 255-264, 2008년 8월.
    김병철, 한순흥, “병렬 웹 서비스를 이용한 조립체 모델 데이터의 획득 (Retrieval of assembly model data using parallel Web Services)”, 한국CAD/CAM학회논문집, Vol. 13, No. 3, pp. 217-226, 2008년 6월.
    김병철, 문두환, 안경익, 한순흥, “절차적으로 표현된 2D CAD 모델 교환을 위한 STEP 통합 응용 자원의 표준화 (Standardization of an integrated application resource of STEP for the exchange of procedurally represented 2D CAD models)”, 한국CAD/CAM학회논문집, Vol. 13, No. 2, pp. 109-120, 2008년 4월.

2007년

    신수철, 김병철, 이효광, 송일환, 한순흥, “매크로 파라메트릭 방법을 이용한 CAD와 CAE의 파트 모델 교환 (Part model exchange between CAD and CAE using the macro-parametric approach)”, 2007 한국CAD/CAM학회 워크샵 (2007년 8월 22일-24일, 서울대학교 멀티미디어 강의동).
    Byungchul Kim and Soonhung Han, “Retrieval of CAD model information using Web Services”, 2007 Design Engineering Workshop(DEWS 2007) (The University of Tokyo, Tokyo, Japan, July 26-27, 2007), pp. 26-29.
    문두환, 김병철, 황진상, 송일환, 조귀목, 한순흥, “모듈 구조를 갖는 STEP 표준의 AP203 edition2에 대한 적용 지침 (Application guide for the modular version of AP203 of ISO 10303 STEP)”, 2007 한국CAD/CAM학회 학술발표회 (2007년 1월 31일-2월 2일, 강원도 평창군 보광 휘닉스 컨벤션센터), pp. 446-453.
    김병철, 한순흥, “웹 서비스를 이용한 CAD 모델 정보의 획득 (Retrieval of CAD model information using Web Services)”, 2007 한국CAD/CAM학회 학술발표회 (2007년 1월 31일-2월 2일, 강원도 평창군 보광 휘닉스 컨벤션센터), pp. 337-342.

2006년

    김병철, 한순흥, “오토메이션 API를 사용한 설계 이력 기반 파라메트릭 CAD 모델 번역기의 통합 (Integration of history-based parametric CAD model translators using Automation API)”, 한국CAD/CAM학회논문집, Vol. 11, No. 3, pp. 164-171, 2006년 6월.

2005년

    문두환, 조준면, 김병철, 장광섭, 한순흥, 류병우, “주문형 금형 부품의 디지털 제조를 지원하는 전자 카달로그 (An e-catalog to support e-machining of ETO mold parts)”, 한국CAD/CAM학회논문집, Vol. 10, No. 3, pp. 188-198, 2005년 9월.

2004년

    김병철, 한순흥, “형상 모델러의 구현을 통한 표준 모델링 명령어 집합의 검증 (Verification of the standard modeling commands by implementing a geometric modeler)”, 한국CAD/CAM학회논문집, Vol. 9, No. 1, pp. 19-26, 2004년 3월.

2003년

    양정삼, 한순흥, 김병철, 박찬국, “CAD 모델 교환을 위한 매크로 파라메트릭 정보의 XML 표현 (A macro parametric data representation for CAD model exchange using XML)”, 대한기계학회논문집A권, Vol. 27, No. 12, pp. 2061-2071, 2003년 12월. (SCOPUS)

2002년

    문두환, 김병철, 한순흥, “피처 트리와 매크로 파일을 이용하는 하이브리드 파라메트릭 번역기 (A hybrid parametric translator using the feature tree and the macro file)”, 한국CAD/CAM학회논문집, Vol. 7, No. 4, pp. 240-247, 2002년 12월.